Putting the Manufacturer’s BIM Model to Work in Metal Building Erection.
Written By:
MBCEA Technical Committee, Dan Halme
Many metal building manufacturers are starting to provide BIM models alongside their erection drawings as part of their standard practice, and many erectors are beginning to rely on them for planning and field coordination. A superintendent can isolate and rotate a connection to see which side a clip attaches to, how a brace lines up, or how framing fits around an opening. The crew can review the assembly from the angle they’ll see in the field and use the corresponding erection detail to confirm how it goes together.
The model also helps with staging and lift planning. For a rafter that ships in several sections, the crew can see how the sections splice together and identify the piece marks needed for ground assembly. The superintendent can compare those marks with the shipping list to decide what to unload first and verify the combined weight of the assembled rafter using the manufacturer’s piece data.
A marked-up screenshot can make a field inquiry easier for the architect to answer. An overall view locates the issue, while a close-up shows the relevant steel, dimensions, and available clearance. If a brace appears to interfere with an overhead door track, the project manager can mark the door supplier’s required clearance directly on the image. That gives the architect a clear view of the potential clash even when the manufacturer’s model contains only the steel.
Erectors should ask for the BIM model when they order the building package, confirm when it will be available, and make sure the superintendent and foreman can open it on the jobsite. Use it at the pre-erection meeting to walk through the first bay, then keep it handy for staging, assembly questions, and field inquiries as the work progresses. The more consistently erectors request and use these models, the clearer the demand for every manufacturer to provide them alongside the erection drawings as a standard deliverable.
Learn more about MBCEA membership and read additional best practice articles.