Metal Building Contractors & Erectors Association Logo

Training

The information provided in the below training packages has been shared in good faith by the Metal Buildings Institute or MBCEA Members in order to assist with compliance regarding OSHA’s training standards. It does not alter or determine compliance responsibilities in the standard or the Occupational Safety and Health Act of 1970. Since interpretations and enforcement policy may change over time, the reader should consult current OSHA interpretations and decisions by the Occupational Safety and Health Review Commission and the courts for additional guidance on OSHA compliance requirements. The ultimate responsibility for verification of compliance and the accuracy of information presented herein rests with the individual employer. Note that some states have additional requirements beyond existing Federal standards. Users agree to hold the MBI, MBCEA and its members/officers harmless from any claims resulting from the use of this material.

Bolting & Aligning Instructor Suggestions

Bolting & Aligning Presentation for Instructor (Speaker Notes)

Bolting & Aligning Presentation   Turn of the Nut Handout

Structural Bolting Handbook (link to purchase)

Bolting & Aligning_test   Bolting & Aligning_test answers

Training materials from the Metal Buildings Institute are intended for use by qualified individuals authorized by their employer to independently evaluate and deliver them. Safety practices and regulations are ever-changing. Metal Buildings Institute makes no express or implied warranty as to the accuracy or comprehensiveness of training materials in relation to any legal standards. The effectiveness and usefulness of these materials must be determined by the company and trainer. No portion of this training is intended to replace, substitute for, or supersede existing federal, state, or OSHA regulations. Trainers and employers must always refer to current federal and local standards to ensure compliance.

Remember that no regulation or interpretation presented here should be used as justification for creating or working in unsafe conditions.

No warranty or representation is made herein as to the thoroughness of the presentations or exact methods shown. Jobsite conditions are ever-changing, and it is the responsibility of each employee and employer to comply with all applicable federal, state and local rules and regulations.

CDZ Presentation for Instructors (Speakers Notes)   CDZ Presentation

Handout OSHA CDZ   CDZ Test   CDZ Test Answers

Training materials from the Metal Buildings Institute are intended for use by qualified individuals authorized by their employer to independently evaluate and deliver them. Safety practices and regulations are ever-changing. Metal Buildings Institute makes no express or implied warranty as to the accuracy or comprehensiveness of training materials in relation to any legal standards. The effectiveness and usefulness of these materials must be determined by the company and trainer. No portion of this training is intended to replace, substitute for, or supersede existing federal, state, or OSHA regulations. Trainers and employers must always refer to current federal and local standards to ensure compliance.

Remember that no regulation or interpretation presented here should be used as justification for creating or working in unsafe conditions.

No warranty or representation is made herein as to the thoroughness of the presentations or exact methods shown. Jobsite conditions are ever-changing, and it is the responsibility of each employee and employer to comply with all applicable federal, state and local rules and regulations.

Fall Protection Basics Presentation R180612 for Instructors (Speakers Notes)

Fall Protection Basics Presentation R180612

Handout 1 1926.502 (b)-(e) Fall Protection Systems Criteria and Practices. – 1926 Subpart R App

G _ Occupational Safety and Health Administration

Reference Only Steel Erection Compliance Directive CPL-02-01-034

Optional OSHA Fall Prevention Handout

Optional Handout OSHA3660 Ladder Fact Sheet

Optional Handout OSHA3146 Fall Protection in Construction

Fall Protection Basics Test R180612

Fall Protection Basics Test Answers R180612

Training materials from the Metal Buildings Institute are intended for use by qualified individuals authorized by their employer to independently evaluate and deliver them. Safety practices and regulations are ever-changing. Metal Buildings Institute makes no express or implied warranty as to the accuracy or comprehensiveness of training materials in relation to any legal standards. The effectiveness and usefulness of these materials must be determined by the company and trainer. No portion of this training is intended to replace, substitute for, or supersede existing federal, state, or OSHA regulations. Trainers and employers must always refer to current federal and local standards to ensure compliance.

Remember that no regulation or interpretation presented here should be used as justification for creating or working in unsafe conditions.

No warranty or representation is made herein as to the thoroughness of the presentations or exact methods shown. Jobsite conditions are ever-changing, and it is the responsibility of each employee and employer to comply with all applicable federal, state and local rules and regulations.

GHS Manual English   GHS Manual Spanish

Training materials from the Metal Buildings Institute are intended for use by qualified individuals authorized by their employer to independently evaluate and deliver them. Safety practices and regulations are ever-changing. Metal Buildings Institute makes no express or implied warranty as to the accuracy or comprehensiveness of training materials in relation to any legal standards. The effectiveness and usefulness of these materials must be determined by the company and trainer. No portion of this training is intended to replace, substitute for, or supersede existing federal, state, or OSHA regulations. Trainers and employers must always refer to current federal and local standards to ensure compliance.

Remember that no regulation or interpretation presented here should be used as justification for creating or working in unsafe conditions.

No warranty or representation is made herein as to the thoroughness of the presentations or exact methods shown. Jobsite conditions are ever-changing, and it is the responsibility of each employee and employer to comply with all applicable federal, state and local rules and regulations.

Rigging Basics Presentation R190415 for Instructor (Speakers Notes)

Rigging Basics Presentation R190415   Synthetic Sling Information

Rigging Components   Qualified Rigger FactSheet

Handout Mobile Crane Signals   General OSHA requirements for Slings

MBI Rigging Basics Test R190117   MBI Rigging Basics Answers R190117

Training materials from the Metal Buildings Institute are intended for use by qualified individuals authorized by their employer to independently evaluate and deliver them. Safety practices and regulations are ever-changing. Metal Buildings Institute makes no express or implied warranty as to the accuracy or comprehensiveness of training materials in relation to any legal standards. The effectiveness and usefulness of these materials must be determined by the company and trainer. No portion of this training is intended to replace, substitute for, or supersede existing federal, state, or OSHA regulations. Trainers and employers must always refer to current federal and local standards to ensure compliance.

Remember that no regulation or interpretation presented here should be used as justification for creating or working in unsafe conditions.

No warranty or representation is made herein as to the thoroughness of the presentations or exact methods shown. Jobsite conditions are ever-changing, and it is the responsibility of each employee and employer to comply with all applicable federal, state and local rules and regulations.